EPR绝缘矿用电缆 - Australian Mining Cables

Australian Mining Cables

Australian Mining Cables

Mining Cable

Mining Cable

11 Min Read

The selection of appropriate cables for hand-held mining equipment such as borers, drills, and portable machinery is a critical safety consideration in underground coal mining and general mining operations. Australian and New Zealand Standard AS/NZS 1802 specifies construction and testing requirements for reeling and trailing cables specifically designed for use in underground coal mines, addressing the unique explosion hazards present due to methane gas and coal dust accumulation. Within this standard, different cable types serve distinct purposes, with Type 209 and Type 241 representing two fundamentally different design philosophies for power distribution to mobile equipment. 为手持采矿设备（如钻孔机、钻机和便携式机械）选择合适的电缆是地下煤矿和一般采矿作业中的关键安全考量。澳大利亚和新西兰标准AS/NZS 1802规定了专门设计用于地下煤矿的卷筒和拖拽电缆的结构和测试要求，解决了因甲烷气体和煤尘积聚而存在的独特爆炸危险。在此标准中，不同的电缆类型服务于不同的目的，其中209型和241型代表了向移动设备供电的两种根本不同的设计理念。

Electrical Systems Department

on2026-01-22

Why Are Type 209 Cables (Individually Screened) Preferred Over Type 241 for High-Voltage Hand-Held Borers or Drill Rigs?

The selection of appropriate cables for hand-held mining equipment such as borers, drills, and portable machinery is a critical safety…

Mining Cable

7 Min Read

Before examining why Australian mining cables require a 1.1/1.1kV rating, it is essential to understand how cable voltage ratings are expressed internationally. The rated voltage of an electrical cable is normally expressed using the combination Uo/U, where both values represent root mean squared (RMS) voltages. According to the Tratos Cable Academy and international standards, Uo represents the voltage between any insulated conductor and earth (or the metallic screen/sheath), whilst U represents the voltage between any two-phase conductors of a multicore cable. 在研究为什么澳大利亚矿用电缆需要1.1/1.1kV额定电压之前，了解国际上如何表示电缆电压额定值是至关重要的。电缆的额定电压通常使用Uo/U组合表示，两个值都代表均方根（RMS）电压。根据Tratos电缆学院和国际标准，Uo代表任何绝缘导体与接地（或金属屏蔽/护套）之间的电压，而U代表多芯电缆中任意两相导体之间的电压。

Electrical Systems Department

on2026-01-19

Why Do Australian Mining Cables Use 1.1/1.1kV Instead of the International Standard 0.6/1kV?

Before examining why Australian mining cables require a 1.1/1.1kV rating, it is essential to understand how cable voltage ratings are…

Mining Cable

9 Min Read

Type 209 mining cable is a composite-screened, elastomer-insulated trailing cable specifically designed for use as a flexible feeder to mining machinery under the Australian and New Zealand Standard AS/NZS 1802:2003. This cable type is engineered for applications where trailing functionality takes precedence over reeling operations, making it ideally suited for power distribution to mobile underground mining equipment. Type 209 矿用电缆是一种复合屏蔽、弹性体绝缘的牵引电缆，专为根据澳大利亚和新西兰标准 AS/NZS 1802:2003 用作采矿机械的柔性馈电电缆而设计。该电缆类型专为牵引功能优先于卷筒操作的应用而设计，非常适合为移动式井下采矿设备供电。

Electrical Systems Department

on2026-01-16

Type 209 Mining Trailing Cable — 1.1kV to 11kV

Type 209 cable construction follows a precisely engineered layer system designed to provide optimal electrical performance, mechanical…