Anhui Feichun Special Cable - Australian Mining Cables

Australian Mining Cables

Australian Mining Cables

Mining Cable

Mining Cable

12 Min Read

Type 440 cables manufactured to AS/NZS 2802:2000 represent sophisticated medium voltage trailing cables designed specifically for surface mining operations, serving voltage ratings from 1.1kV to 22kV. These cables incorporate semiconductive screening systems that are essential for safe medium voltage operation, and any crushing incident can compromise these critical protective layers. Understanding how to properly assess screen integrity after mechanical damage is fundamental to maintaining electrical safety in mining operations, as the semi-conductive screens serve multiple critical functions including uniform electric field distribution, partial discharge suppression, and earth fault detection capability. 按照AS/NZS 2802:2000标准制造的Type 440电缆是专门为露天采矿作业设计的复杂中压拖曳电缆，服务电压范围从1.1kV到22kV。这些电缆采用半导体屏蔽系统，对于中压安全运行至关重要，任何碾压事故都可能损害这些关键保护层。了解如何在机械损坏后正确评估屏蔽完整性是维护采矿作业电气安全的基础，因为半导体屏蔽层具有多种关键功能，包括均匀电场分布、局部放电抑制和接地故障检测能力。

Electrical Systems Department

on2026-01-22

How Do You Test the Integrity of the Semi-Conductive Screen in Type 440 Cables After a Crushing Incident?

Comprehensive technical guide on testing semi-conductive screen integrity in AS/NZS 2802 Type 440 mining cables after crushing incidents.…

Mining Cable

9 Min Read

Trailing and reeling cables pose an elevated safety risk in mining operations because a damaged trailing cable can lead to earthing faults and expose workers to direct and indirect electric shock hazards. Under Australian mine safety legislation, these cables require specific design mitigation measures and mandatory periodic testing to ensure ongoing electrical integrity and worker protection. The testing regime encompasses both insulation resistance (IR) testing and earth continuity protection verification, with frequencies determined by the type of mining operation and the applicable state regulations. 在采矿作业中，拖曳和卷绕电缆存在较高的安全风险，因为损坏的拖曳电缆可能导致接地故障，使工人面临直接和间接电击危害。根据澳大利亚矿山安全立法，这些电缆需要特定的设计缓解措施和强制性定期测试，以确保持续的电气完整性和工人保护。测试制度包括绝缘电阻(IR)测试和接地连续性保护验证，测试频率由采矿作业类型和适用的州法规确定。

Electrical Systems Department

on2026-01-22

How Often Should Insulation Resistance (IR) and Continuity Tests Be Performed on Trailing Cables Under Australian Mine Safety Regulations?

Trailing and reeling cables pose an elevated safety risk in mining operations because a damaged trailing cable can lead to earthing faults and…

Mining Cable

11 Min Read

Birdcaging is a severe form of cable distortion that occurs when the individual strands or conductors of a cable unravel and expand outward, creating a shape that resembles a birdcage. This phenomenon represents one of the most critical failure modes for stranded cables and wire ropes used in industrial applications. When birdcaging occurs, the cable's structural integrity becomes compromised, and it must be immediately removed from service to prevent catastrophic failure. 鸟笼现象是一种严重的电缆变形形式，当电缆的单股或导体松散并向外膨胀时发生，形成类似鸟笼的形状。这种现象是工业应用中绞合电缆和钢丝绳最关键的失效模式之一。当鸟笼现象发生时，电缆的结构完整性会受到损害，必须立即停止使用以防止灾难性故障。

Electrical Systems Department

on2026-01-22

How Do You Prevent “Birdcaging” in Large Cross-Section Type 455 Cables During Installation on Long-Travel Stackers?

Birdcaging is a severe form of cable distortion that occurs when the individual strands or conductors of a cable unravel and expand outward,…

Mining Cable

8 Min Read

AS/NZS 1802 cables demonstrate strong suitability for deployment in both saline (coastal mining) environments and acidic groundwater conditions. This performance capability stems directly from the standard's specification of three key corrosion-resistant materials: tinned copper conductors, Ethylene Propylene Rubber (EPR) insulation, and Polychloroprene (PCP) heavy-duty sheathing. Each component contributes specific chemical resistance properties that collectively provide robust protection against the aggressive chemical environments encountered in Australian coastal and underground mining operations. AS/NZS 1802电缆在盐水（沿海采矿）环境和酸性地下水条件下均表现出良好的适用性。这种性能源于该标准规定的三种关键耐腐蚀材料：镀锡铜导体、乙丙橡胶（EPR）绝缘层和聚氯丁烯（PCP）重型护套。每种组件都具有特定的耐化学性能，共同为澳大利亚沿海和地下采矿作业中遇到的腐蚀性化学环境提供可靠保护。

Electrical Systems Department

on2026-01-22

Are AS/NZS 1802 Cables Suitable for Use in Saline Environments (Coastal Mines) or Acidic Groundwater Conditions?

AS/NZS 1802 cables demonstrate strong suitability for deployment in both saline (coastal mining) environments and acidic groundwater…

Mining Cable

12 Min Read

AS/NZS 1802:2018 is the joint Australian/New Zealand Standard that specifies the construction, testing, and performance requirements for elastomer-insulated, elastomer-sheathed reeling and trailing electric cables specifically designed for use in underground coal mines. This standard represents the culmination of decades of engineering expertise and safety considerations, with its origins dating back to AS C81-1941, making it one of the most mature and thoroughly developed cable standards in the global mining industry.

Electrical Systems Department

on2026-01-15

What is AS/NZS 1802 – Reeling Cables for Underground Mining?

AS/NZS 1802, AS/NZS 1802:2018, underground coal mining cable, reeling cable mining, trailing cable underground, Type 240 mining cable, Type…